1957 Peugeot 203 vs. 2010 Cadillac DTS

To start off, 2010 Cadillac DTS is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Peugeot 203. In addition, the cost of maintenance, including insurance, on 1957 Peugeot 203 would be higher. At 4,600 cc (8 cylinders), 2010 Cadillac DTS is equipped with a bigger engine. In terms of performance, 2010 Cadillac DTS (275 HP @ 6000 RPM) has 231 more horse power than 1957 Peugeot 203. (44 HP @ 4600 RPM) In normal driving conditions, 2010 Cadillac DTS should accelerate faster than 1957 Peugeot 203. With that said, vehicle weight also plays an important factor in acceleration. 2010 Cadillac DTS weights approximately 838 kg more than 1957 Peugeot 203. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1957 Peugeot 203 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Peugeot 203. However, in wet, icy, snow, or gravel driving conditions, 2010 Cadillac DTS, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Cadillac DTS (400 Nm @ 4400 RPM) has 322 more torque (in Nm) than 1957 Peugeot 203. (78 Nm @ 2500 RPM). This means 2010 Cadillac DTS will have an easier job in driving up hills or pulling heavy equipment than 1957 Peugeot 203. 2010 Cadillac DTS has automatic transmission and 1957 Peugeot 203 has manual transmission. 1957 Peugeot 203 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Cadillac DTS will be easier to drive especially in heavy traffic.

Compare all specifications:

1957 Peugeot 203 2010 Cadillac DTS
Make Peugeot Cadillac
Model 203 DTS
Year Released 1957 2010
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 1288 cc 4600 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 44 HP 275 HP
Engine RPM 4600 RPM 6000 RPM
Torque 78 Nm 400 Nm
Torque RPM 2500 RPM 4400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 980 kg 1818 kg
Vehicle Length 4360 mm 5273 mm
Vehicle Width 1620 mm 1900 mm
Vehicle Height 1470 mm 1463 mm
Wheelbase Size 2580 mm 2936 mm
Fuel Tank Capacity 50 L 68 L