1957 Rover P4 vs. 2010 Fiat Siena
To start off, 2010 Fiat Siena is newer by 53 year(s). Which means there will be less support and parts availability for 1957 Rover P4. In addition, the cost of maintenance, including insurance, on 1957 Rover P4 would be higher. At 1,997 cc (4 cylinders), 1957 Rover P4 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1957 Rover P4 weights approximately 290 kg more than 2010 Fiat Siena.
Because 1957 Rover P4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Rover P4. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1957 Rover P4 (138 Nm @ 2000 RPM) has 3 more torque (in Nm) than 2010 Fiat Siena. (135 Nm @ 2500 RPM). This means 1957 Rover P4 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Siena.
Compare all specifications:
1957 Rover P4 | 2010 Fiat Siena | |
Make | Rover | Fiat |
Model | P4 | Siena |
Year Released | 1957 | 2010 |
Engine Position | Front | Front |
Engine Size | 1997 cc | 1697 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 51 HP | 0 HP |
Torque | 138 Nm | 135 Nm |
Torque RPM | 2000 RPM | 2500 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1380 kg | 1090 kg |
Vehicle Length | 4550 mm | 4140 mm |
Vehicle Width | 1680 mm | 1640 mm |
Vehicle Height | 1620 mm | 1440 mm |
Wheelbase Size | 2830 mm | 2380 mm |