1958 Abarth 1000 vs. 1968 Jensen FF
To start off, 1968 Jensen FF is newer by 10 year(s). Which means there will be less support and parts availability for 1958 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1958 Abarth 1000 would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 192 more horse power than 1958 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 1968 Jensen FF should accelerate faster than 1958 Abarth 1000. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 1295 kg more than 1958 Abarth 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 491 more torque (in Nm) than 1958 Abarth 1000. (96 Nm @ 5000 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 1000.
Compare all specifications:
1958 Abarth 1000 | 1968 Jensen FF | |
Make | Abarth | Jensen |
Model | 1000 | FF |
Year Released | 1958 | 1968 |
Engine Position | Rear | Front |
Engine Size | 996 cc | 6276 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 87 HP | 279 HP |
Engine RPM | 8000 RPM | 4600 RPM |
Torque | 96 Nm | 587 Nm |
Torque RPM | 5000 RPM | 2800 RPM |
Engine Bore Size | 74 mm | 108 mm |
Engine Stroke Size | 58 mm | 85.9 mm |
Engine Compression Ratio | 10.0:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 680 kg | 1975 kg |
Vehicle Length | 3700 mm | 4860 mm |
Vehicle Width | 1560 mm | 1760 mm |
Vehicle Height | 1210 mm | 1360 mm |
Wheelbase Size | 2170 mm | 2780 mm |
Fuel Tank Capacity | 60 L | 72 L |