1958 Abarth 1000 vs. 2010 BMW 320
To start off, 2010 BMW 320 is newer by 52 year(s). Which means there will be less support and parts availability for 1958 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1958 Abarth 1000 would be higher. At 1,995 cc (4 cylinders), 2010 BMW 320 is equipped with a bigger engine. In terms of performance, 2010 BMW 320 (182 HP @ 4000 RPM) has 95 more horse power than 1958 Abarth 1000. (87 HP @ 8000 RPM) In normal driving conditions, 2010 BMW 320 should accelerate faster than 1958 Abarth 1000.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 320 (380 Nm @ 2750 RPM) has 284 more torque (in Nm) than 1958 Abarth 1000. (96 Nm @ 5000 RPM). This means 2010 BMW 320 will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 1000.
Compare all specifications:
1958 Abarth 1000 | 2010 BMW 320 | |
Make | Abarth | BMW |
Model | 1000 | 320 |
Year Released | 1958 | 2010 |
Engine Position | Rear | Front |
Engine Size | 996 cc | 1995 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 87 HP | 182 HP |
Engine RPM | 8000 RPM | 4000 RPM |
Torque | 96 Nm | 380 Nm |
Torque RPM | 5000 RPM | 2750 RPM |
Engine Bore Size | 74 mm | 90 mm |
Engine Stroke Size | 58 mm | 84 mm |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Transmission Type | Manual | 6-speed manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Length | 3700 mm | 4624 mm |
Vehicle Width | 1560 mm | 1811 mm |
Vehicle Height | 1210 mm | 1384 mm |
Wheelbase Size | 2170 mm | 2810 mm |
Fuel Tank Capacity | 60 L | 57 L |