1958 Abarth 500 vs. 2008 Fiat Siena

To start off, 2008 Fiat Siena is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Abarth 500. In addition, the cost of maintenance, including insurance, on 1958 Abarth 500 would be higher. At 1,697 cc (4 cylinders), 2008 Fiat Siena is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Siena weights approximately 645 kg more than 1958 Abarth 500.

Because 1958 Abarth 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Abarth 500. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Siena (135 Nm @ 2500 RPM) has 103 more torque (in Nm) than 1958 Abarth 500. (32 Nm @ 3000 RPM). This means 2008 Fiat Siena will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 500.

Compare all specifications:

1958 Abarth 500 2008 Fiat Siena
Make Abarth Fiat
Model 500 Siena
Year Released 1958 2008
Engine Position Rear Front
Engine Size 479 cc 1697 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 20 HP 0 HP
Torque 32 Nm 135 Nm
Torque RPM 3000 RPM 2500 RPM
Fuel Type Gasoline Diesel
Top Speed 115 km/hour 160 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 445 kg 1090 kg
Vehicle Length 2980 mm 4140 mm
Vehicle Width 1330 mm 1640 mm
Vehicle Height 1330 mm 1440 mm
Wheelbase Size 1850 mm 2380 mm
Fuel Tank Capacity 27 L 47 L