1958 Abarth 600 vs. 1993 Mazda RX-7

To start off, 1993 Mazda RX-7 is newer by 35 year(s). Which means there will be less support and parts availability for 1958 Abarth 600. In addition, the cost of maintenance, including insurance, on 1958 Abarth 600 would be higher. At 2,616 cc, 1993 Mazda RX-7 is equipped with a bigger engine. In terms of performance, 1993 Mazda RX-7 (238 HP @ 6500 RPM) has 197 more horse power than 1958 Abarth 600. (41 HP @ 5500 RPM) In normal driving conditions, 1993 Mazda RX-7 should accelerate faster than 1958 Abarth 600. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mazda RX-7 weights approximately 725 kg more than 1958 Abarth 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mazda RX-7 (297 Nm @ 5000 RPM) has 243 more torque (in Nm) than 1958 Abarth 600. (54 Nm @ 4000 RPM). This means 1993 Mazda RX-7 will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 600.

Compare all specifications:

1958 Abarth 600 1993 Mazda RX-7
Make Abarth Mazda
Model 600 RX-7
Year Released 1958 1993
Engine Position Rear Front
Engine Size 747 cc 2616 cc
Engine Type in-line dual-disk rotary
Horse Power 41 HP 238 HP
Engine RPM 5500 RPM 6500 RPM
Torque 54 Nm 297 Nm
Torque RPM 4000 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 585 kg 1310 kg
Vehicle Length 3300 mm 4320 mm
Vehicle Width 1390 mm 1760 mm
Vehicle Height 1410 mm 1240 mm
Wheelbase Size 2010 mm 2430 mm