1958 Abarth 750 vs. 1967 Jensen FF
To start off, 1967 Jensen FF is newer by 9 year(s). Which means there will be less support and parts availability for 1958 Abarth 750. In addition, the cost of maintenance, including insurance, on 1958 Abarth 750 would be higher. At 6,276 cc (8 cylinders), 1967 Jensen FF is equipped with a bigger engine. In terms of performance, 1967 Jensen FF (279 HP @ 4600 RPM) has 219 more horse power than 1958 Abarth 750. (60 HP @ 7000 RPM) In normal driving conditions, 1967 Jensen FF should accelerate faster than 1958 Abarth 750. With that said, vehicle weight also plays an important factor in acceleration. 1967 Jensen FF weights approximately 1435 kg more than 1958 Abarth 750. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1967 Jensen FF (587 Nm @ 2800 RPM) has 518 more torque (in Nm) than 1958 Abarth 750. (69 Nm @ 5000 RPM). This means 1967 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 750.
Compare all specifications:
1958 Abarth 750 | 1967 Jensen FF | |
Make | Abarth | Jensen |
Model | 750 | FF |
Year Released | 1958 | 1967 |
Engine Position | Rear | Front |
Engine Size | 747 cc | 6276 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 60 HP | 279 HP |
Engine RPM | 7000 RPM | 4600 RPM |
Torque | 69 Nm | 587 Nm |
Torque RPM | 5000 RPM | 2800 RPM |
Fuel Type | Gasoline | Gasoline |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 540 kg | 1975 kg |
Vehicle Length | 3480 mm | 4860 mm |
Vehicle Width | 1360 mm | 1760 mm |
Vehicle Height | 1110 mm | 1360 mm |
Wheelbase Size | 2010 mm | 2780 mm |