1958 Abarth 750 vs. 1984 Audi 80

To start off, 1984 Audi 80 is newer by 26 year(s). Which means there will be less support and parts availability for 1958 Abarth 750. In addition, the cost of maintenance, including insurance, on 1958 Abarth 750 would be higher. At 1,296 cc (4 cylinders), 1984 Audi 80 is equipped with a bigger engine. In terms of performance, 1958 Abarth 750 (60 HP @ 7000 RPM) has 1 more horse power than 1984 Audi 80. (59 HP @ 5600 RPM). In normal driving conditions, 1958 Abarth 750 should accelerate faster than 1984 Audi 80. With that said, vehicle weight also plays an important factor in acceleration. 1984 Audi 80 weights approximately 390 kg more than 1958 Abarth 750.

Because 1958 Abarth 750 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Abarth 750. However, in wet, icy, snow, or gravel driving conditions, 1984 Audi 80, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1984 Audi 80 (101 Nm @ 3500 RPM) has 32 more torque (in Nm) than 1958 Abarth 750. (69 Nm @ 5000 RPM). This means 1984 Audi 80 will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 750.

Compare all specifications:

1958 Abarth 750 1984 Audi 80
Make Abarth Audi
Model 750 80
Year Released 1958 1984
Engine Position Rear Front
Engine Size 747 cc 1296 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 60 HP 59 HP
Engine RPM 7000 RPM 5600 RPM
Torque 69 Nm 101 Nm
Torque RPM 5000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 540 kg 930 kg
Vehicle Length 3480 mm 4390 mm
Vehicle Width 1360 mm 1690 mm
Vehicle Height 1110 mm 1380 mm
Wheelbase Size 2010 mm 2550 mm