1958 AC Aceca vs. 2010 Fiat Siena
To start off, 2010 Fiat Siena is newer by 52 year(s). Which means there will be less support and parts availability for 1958 AC Aceca. In addition, the cost of maintenance, including insurance, on 1958 AC Aceca would be higher. At 1,971 cc (6 cylinders), 1958 AC Aceca is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Siena weights approximately 176 kg more than 1958 AC Aceca.
Because 1958 AC Aceca is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 AC Aceca. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 AC Aceca (167 Nm @ 4500 RPM) has 65 more torque (in Nm) than 2010 Fiat Siena. (102 Nm @ 3250 RPM). This means 1958 AC Aceca will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Siena.
Compare all specifications:
1958 AC Aceca | 2010 Fiat Siena | |
Make | AC | Fiat |
Model | Aceca | Siena |
Year Released | 1958 | 2010 |
Engine Position | Front | Front |
Engine Size | 1971 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 123 HP | 0 HP |
Torque | 167 Nm | 102 Nm |
Torque RPM | 4500 RPM | 3250 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 894 kg | 1070 kg |
Vehicle Length | 4070 mm | 3830 mm |
Vehicle Width | 1560 mm | 1640 mm |
Vehicle Height | 1330 mm | 1440 mm |
Wheelbase Size | 2290 mm | 2380 mm |
Fuel Tank Capacity | 59 L | 54 L |