1958 Alpine A 106 vs. 1965 Ginetta G10
To start off, 1965 Ginetta G10 is newer by 7 year(s). Which means there will be less support and parts availability for 1958 Alpine A 106. In addition, the cost of maintenance, including insurance, on 1958 Alpine A 106 would be higher. At 4,726 cc (8 cylinders), 1965 Ginetta G10 is equipped with a bigger engine. In terms of performance, 1965 Ginetta G10 (290 HP @ 5000 RPM) has 247 more horse power than 1958 Alpine A 106. (43 HP @ 6200 RPM) In normal driving conditions, 1965 Ginetta G10 should accelerate faster than 1958 Alpine A 106. With that said, vehicle weight also plays an important factor in acceleration. 1965 Ginetta G10 weights approximately 390 kg more than 1958 Alpine A 106. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1958 Alpine A 106 | 1965 Ginetta G10 | |
| Make | Alpine | Ginetta |
| Model | A 106 | G10 |
| Year Released | 1958 | 1965 |
| Engine Position | Rear | Middle |
| Engine Size | 747 cc | 4726 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 43 HP | 290 HP |
| Engine RPM | 6200 RPM | 5000 RPM |
| Engine Bore Size | 54.5 mm | 101.6 mm |
| Engine Stroke Size | 80 mm | 72.9 mm |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 2 seats | 2 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 550 kg | 940 kg |
| Vehicle Length | 3700 mm | 3990 mm |
| Vehicle Width | 1450 mm | 1510 mm |
| Vehicle Height | 1280 mm | 1280 mm |
| Wheelbase Size | 2110 mm | 2290 mm |
| Fuel Tank Capacity | 28 L | 72 L |
