1958 Alpine A 106 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Alpine A 106. In addition, the cost of maintenance, including insurance, on 1958 Alpine A 106 would be higher. At 1,968 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 95 more horse power than 1958 Alpine A 106. (43 HP @ 6200 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1958 Alpine A 106. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 1300 kg more than 1958 Alpine A 106. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Alpine A 106 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Alpine A 106. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 266 more torque (in Nm) than 1958 Alpine A 106. (45 Nm @ 2000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1958 Alpine A 106. 2008 Chrysler Sebring has automatic transmission and 1958 Alpine A 106 has manual transmission. 1958 Alpine A 106 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1958 Alpine A 106 | 2008 Chrysler Sebring | |
Make | Alpine | Chrysler |
Model | A 106 | Sebring |
Year Released | 1958 | 2008 |
Body Type | Coupe | Convertible |
Engine Position | Rear | Front |
Engine Size | 747 cc | 1968 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 43 HP | 138 HP |
Engine RPM | 6200 RPM | 4000 RPM |
Torque | 45 Nm | 311 Nm |
Torque RPM | 2000 RPM | 1800 RPM |
Engine Bore Size | 54.5 mm | 81 mm |
Engine Stroke Size | 80 mm | 95.5 mm |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 550 kg | 1850 kg |
Vehicle Length | 3700 mm | 4940 mm |
Vehicle Width | 1450 mm | 1850 mm |
Vehicle Height | 1280 mm | 1490 mm |
Wheelbase Size | 2110 mm | 2770 mm |
Fuel Tank Capacity | 28 L | 64 L |