1958 Aston Martin DB2 vs. 2010 Chevrolet Malibu
To start off, 2010 Chevrolet Malibu is newer by 52 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB2. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB2 would be higher. At 2,922 cc (6 cylinders), 1958 Aston Martin DB2 is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Malibu (169 HP @ 6400 RPM) has 51 more horse power than 1958 Aston Martin DB2. (118 HP @ 5000 RPM) In normal driving conditions, 2010 Chevrolet Malibu should accelerate faster than 1958 Aston Martin DB2. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Malibu weights approximately 384 kg more than 1958 Aston Martin DB2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Aston Martin DB2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Aston Martin DB2. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Malibu, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Aston Martin DB2 (240 Nm @ 3000 RPM) has 23 more torque (in Nm) than 2010 Chevrolet Malibu. (217 Nm @ 4500 RPM). This means 1958 Aston Martin DB2 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chevrolet Malibu. 2010 Chevrolet Malibu has automatic transmission and 1958 Aston Martin DB2 has manual transmission. 1958 Aston Martin DB2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Malibu will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1958 Aston Martin DB2 | 2010 Chevrolet Malibu | |
| Make | Aston Martin | Chevrolet |
| Model | DB2 | Malibu |
| Year Released | 1958 | 2010 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 2922 cc | 2400 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 118 HP | 169 HP |
| Engine RPM | 5000 RPM | 6400 RPM |
| Torque | 240 Nm | 217 Nm |
| Torque RPM | 3000 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1175 kg | 1559 kg |
| Vehicle Length | 4310 mm | 4872 mm |
| Vehicle Width | 1660 mm | 1786 mm |
| Vehicle Height | 1370 mm | 1450 mm |
| Wheelbase Size | 2520 mm | 2852 mm |
| Fuel Tank Capacity | 86 L | 61 L |
