1958 Aston Martin DB3 vs. 1966 Morris Oxford

To start off, 1966 Morris Oxford is newer by 8 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1958 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, 1958 Aston Martin DB3 (153 HP) has 93 more horse power than 1966 Morris Oxford. (60 HP). In normal driving conditions, 1958 Aston Martin DB3 should accelerate faster than 1966 Morris Oxford. With that said, vehicle weight also plays an important factor in acceleration. 1966 Morris Oxford weights approximately 190 kg more than 1958 Aston Martin DB3.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Aston Martin DB3 (195 Nm @ 3000 RPM) has 73 more torque (in Nm) than 1966 Morris Oxford. (122 Nm @ 2500 RPM). This means 1958 Aston Martin DB3 will have an easier job in driving up hills or pulling heavy equipment than 1966 Morris Oxford.

Compare all specifications:

1958 Aston Martin DB3 1966 Morris Oxford
Make Aston Martin Morris
Model DB3 Oxford
Year Released 1958 1966
Engine Position Front Front
Engine Size 2922 cc 1622 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 153 HP 60 HP
Torque 195 Nm 122 Nm
Torque RPM 3000 RPM 2500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 940 kg 1130 kg
Vehicle Length 3920 mm 4430 mm
Vehicle Width 1510 mm 1620 mm
Vehicle Height 1050 mm 1530 mm
Wheelbase Size 2220 mm 2530 mm
Fuel Tank Capacity 70 L 45 L