1958 Aston Martin DB3 vs. 1996 GAZ 3110

To start off, 1996 GAZ 3110 is newer by 38 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1958 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, 1958 Aston Martin DB3 (153 HP @ 5500 RPM) has 63 more horse power than 1996 GAZ 3110. (90 HP @ 4200 RPM). In normal driving conditions, 1958 Aston Martin DB3 should accelerate faster than 1996 GAZ 3110. With that said, vehicle weight also plays an important factor in acceleration. 1996 GAZ 3110 weights approximately 510 kg more than 1958 Aston Martin DB3.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 GAZ 3110 (230 Nm @ 2500 RPM) has 35 more torque (in Nm) than 1958 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 1996 GAZ 3110 will have an easier job in driving up hills or pulling heavy equipment than 1958 Aston Martin DB3.

Compare all specifications:

1958 Aston Martin DB3 1996 GAZ 3110
Make Aston Martin GAZ
Model DB3 3110
Year Released 1958 1996
Engine Position Front Front
Engine Size 2922 cc 2446 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 153 HP 90 HP
Engine RPM 5500 RPM 4200 RPM
Torque 195 Nm 230 Nm
Torque RPM 3000 RPM 2500 RPM
Fuel Type Gasoline Diesel
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 940 kg 1450 kg
Vehicle Length 3920 mm 4880 mm
Vehicle Width 1510 mm 1810 mm
Vehicle Height 1050 mm 1490 mm
Wheelbase Size 2220 mm 2810 mm