1958 Aston Martin DB3 vs. 2003 Chrysler 300

To start off, 2003 Chrysler 300 is newer by 45 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1958 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, 2003 Chrysler 300 (200 HP @ 5800 RPM) has 47 more horse power than 1958 Aston Martin DB3. (153 HP @ 5500 RPM) In normal driving conditions, 2003 Chrysler 300 should accelerate faster than 1958 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2003 Chrysler 300 weights approximately 640 kg more than 1958 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1958 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Chrysler 300 (255 Nm @ 4900 RPM) has 60 more torque (in Nm) than 1958 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2003 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1958 Aston Martin DB3. 2003 Chrysler 300 has automatic transmission and 1958 Aston Martin DB3 has manual transmission. 1958 Aston Martin DB3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

1958 Aston Martin DB3 2003 Chrysler 300
Make Aston Martin Chrysler
Model DB3 300
Year Released 1958 2003
Engine Position Front Front
Engine Size 2922 cc 2734 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 153 HP 200 HP
Engine RPM 5500 RPM 5800 RPM
Torque 195 Nm 255 Nm
Torque RPM 3000 RPM 4900 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 940 kg 1580 kg
Vehicle Length 3920 mm 5010 mm
Vehicle Width 1510 mm 1930 mm
Vehicle Height 1050 mm 1420 mm
Wheelbase Size 2220 mm 2880 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]