1958 Aston Martin DB3 vs. 2003 Lexus IS

To start off, 2003 Lexus IS is newer by 45 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB3 would be higher. At 2,922 cc (6 cylinders), 1958 Aston Martin DB3 is equipped with a bigger engine. In terms of performance, both vehicles can yield 153 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2003 Lexus IS weights approximately 460 kg more than 1958 Aston Martin DB3.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2003 Lexus IS (196 Nm @ 4600 RPM) has 1 more torque (in Nm) than 1958 Aston Martin DB3. (195 Nm @ 3000 RPM). This means 2003 Lexus IS will have an easier job in driving up hills or pulling heavy equipment than 1958 Aston Martin DB3.

Compare all specifications:

1958 Aston Martin DB3 2003 Lexus IS
Make Aston Martin Lexus
Model DB3 IS
Year Released 1958 2003
Engine Position Front Front
Engine Size 2922 cc 1988 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 153 HP 153 HP
Engine RPM 5500 RPM 6200 RPM
Torque 195 Nm 196 Nm
Torque RPM 3000 RPM 4600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 940 kg 1400 kg
Vehicle Length 3920 mm 4410 mm
Vehicle Width 1510 mm 1730 mm
Vehicle Height 1050 mm 1430 mm
Wheelbase Size 2220 mm 2680 mm
Fuel Tank Capacity 70 L 70 L