1958 Aston Martin DB3 vs. 2012 Lexus RX

To start off, 2012 Lexus RX is newer by 54 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB3. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB3 would be higher. At 3,500 cc (6 cylinders), 2012 Lexus RX is equipped with a bigger engine. In terms of performance, 2012 Lexus RX (295 HP @ 6000 RPM) has 142 more horse power than 1958 Aston Martin DB3. (153 HP @ 5500 RPM) In normal driving conditions, 2012 Lexus RX should accelerate faster than 1958 Aston Martin DB3. With that said, vehicle weight also plays an important factor in acceleration. 2012 Lexus RX weights approximately 1110 kg more than 1958 Aston Martin DB3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1958 Aston Martin DB3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Aston Martin DB3. However, in wet, icy, snow, or gravel driving conditions, 2012 Lexus RX, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1958 Aston Martin DB3 2012 Lexus RX
Make Aston Martin Lexus
Model DB3 RX
Year Released 1958 2012
Engine Position Front Front
Engine Size 2922 cc 3500 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 153 HP 295 HP
Engine RPM 5500 RPM 6000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual CVT
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 940 kg 2050 kg
Vehicle Length 3920 mm 4770 mm
Vehicle Width 1510 mm 1885 mm
Vehicle Height 1050 mm 1684 mm
Wheelbase Size 2220 mm 2741 mm
Fuel Tank Capacity 70 L 65 L