1958 Aston Martin DB4 vs. 2010 BMW 330

To start off, 2010 BMW 330 is newer by 52 year(s). Which means there will be less support and parts availability for 1958 Aston Martin DB4. In addition, the cost of maintenance, including insurance, on 1958 Aston Martin DB4 would be higher. At 3,668 cc (6 cylinders), 1958 Aston Martin DB4 is equipped with a bigger engine. In terms of performance, 2010 BMW 330 (256 HP @ 4000 RPM) has 16 more horse power than 1958 Aston Martin DB4. (240 HP @ 5500 RPM) In normal driving conditions, 2010 BMW 330 should accelerate faster than 1958 Aston Martin DB4.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 330 (540 Nm @ 3000 RPM) has 215 more torque (in Nm) than 1958 Aston Martin DB4. (325 Nm @ 4250 RPM). This means 2010 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 1958 Aston Martin DB4.

Compare all specifications:

1958 Aston Martin DB4 2010 BMW 330
Make Aston Martin BMW
Model DB4 330
Year Released 1958 2010
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 3668 cc 2993 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 240 HP 256 HP
Engine RPM 5500 RPM 4000 RPM
Torque 325 Nm 540 Nm
Torque RPM 4250 RPM 3000 RPM
Engine Bore Size 92 mm 90 mm
Engine Stroke Size 92 mm 84 mm
Drive Type Rear Rear
Transmission Type Manual 6-speed manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Length 4490 mm 4624 mm
Vehicle Width 1680 mm 1811 mm
Vehicle Height 1330 mm 1384 mm
Wheelbase Size 2500 mm 2810 mm
Fuel Tank Capacity 86 L 57 L