1958 Austin A 35 vs. 1958 Austin A 95
To start off, both 1958 Austin A 35 and 1958 Austin A 95 were released in the same year (1958). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,639 cc (6 cylinders), 1958 Austin A 95 is equipped with a bigger engine. In terms of performance, 1958 Austin A 95 (92 HP @ 4500 RPM) has 58 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1958 Austin A 95 should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin A 95 weights approximately 666 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1958 Austin A 95 (176 Nm @ 2000 RPM) has 108 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1958 Austin A 95 will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 1958 Austin A 95 | |
| Make | Austin | Austin |
| Model | A 35 | A 95 |
| Year Released | 1958 | 1958 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 2639 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 34 HP | 92 HP |
| Engine RPM | 4750 RPM | 4500 RPM |
| Torque | 68 Nm | 176 Nm |
| Torque RPM | 2000 RPM | 2000 RPM |
| Engine Bore Size | 62.9 mm | 79.4 mm |
| Engine Stroke Size | 76.2 mm | 88.9 mm |
| Engine Compression Ratio | 8.3:1 | 8.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 690 kg | 1356 kg |
| Vehicle Length | 3470 mm | 4600 mm |
| Vehicle Width | 1410 mm | 1630 mm |
| Vehicle Height | 1490 mm | 1580 mm |
| Wheelbase Size | 2030 mm | 2690 mm |
| Fuel Tank Capacity | 26 L | 72 L |
