1958 Austin A 35 vs. 1960 Holden FC
To start off, 1960 Holden FC is newer by 2 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 2,165 cc (6 cylinders), 1960 Holden FC is equipped with a bigger engine. In terms of performance, 1960 Holden FC (62 HP @ 4000 RPM) has 28 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1960 Holden FC should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1960 Holden FC weights approximately 290 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1960 Holden FC (150 Nm @ 1400 RPM) has 82 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1960 Holden FC will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 1960 Holden FC | |
| Make | Austin | Holden |
| Model | A 35 | FC |
| Year Released | 1958 | 1960 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 2165 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 34 HP | 62 HP |
| Engine RPM | 4750 RPM | 4000 RPM |
| Torque | 68 Nm | 150 Nm |
| Torque RPM | 2000 RPM | 1400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 690 kg | 980 kg |
| Vehicle Length | 3470 mm | 4480 mm |
| Vehicle Width | 1410 mm | 1710 mm |
| Vehicle Height | 1490 mm | 1560 mm |
| Wheelbase Size | 2030 mm | 2670 mm |
