1958 Austin A 35 vs. 1961 Lancia Appia

To start off, 1961 Lancia Appia is newer by 3 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 1,090 cc (4 cylinders), 1961 Lancia Appia is equipped with a bigger engine. In terms of performance, 1961 Lancia Appia (55 HP @ 4900 RPM) has 21 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1961 Lancia Appia should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1961 Lancia Appia weights approximately 115 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 1961 Lancia Appia (87 Nm @ 3500 RPM) has 19 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1961 Lancia Appia will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.

Compare all specifications:

1958 Austin A 35 1961 Lancia Appia
Make Austin Lancia
Model A 35 Appia
Year Released 1958 1961
Engine Position Front Front
Engine Size 948 cc 1090 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 34 HP 55 HP
Engine RPM 4750 RPM 4900 RPM
Torque 68 Nm 87 Nm
Torque RPM 2000 RPM 3500 RPM
Engine Bore Size 62.9 mm 68 mm
Engine Stroke Size 76.2 mm 75 mm
Engine Compression Ratio 8.3:1 9.0:1
Fuel Type Gasoline Gasoline
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 690 kg 805 kg
Vehicle Length 3470 mm 4200 mm
Vehicle Width 1410 mm 1430 mm
Vehicle Height 1490 mm 1250 mm
Wheelbase Size 2030 mm 2520 mm
Fuel Tank Capacity 26 L 42 L