1958 Austin A 35 vs. 1962 Simca Oceane

To start off, 1962 Simca Oceane is newer by 4 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 1,290 cc (4 cylinders), 1962 Simca Oceane is equipped with a bigger engine. In terms of performance, 1962 Simca Oceane (56 HP @ 5200 RPM) has 22 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1962 Simca Oceane should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1962 Simca Oceane weights approximately 280 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 1962 Simca Oceane (90 Nm @ 3100 RPM) has 22 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1962 Simca Oceane will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.

Compare all specifications:

1958 Austin A 35 1962 Simca Oceane
Make Austin Simca
Model A 35 Oceane
Year Released 1958 1962
Engine Position Front Front
Engine Size 948 cc 1290 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 34 HP 56 HP
Engine RPM 4750 RPM 5200 RPM
Torque 68 Nm 90 Nm
Torque RPM 2000 RPM 3100 RPM
Engine Bore Size 62.9 mm 74 mm
Engine Stroke Size 76.2 mm 75 mm
Engine Compression Ratio 8.3:1 7.8:1
Fuel Type Gasoline Gasoline
Number of Seats 5 seats 2 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 690 kg 970 kg
Vehicle Length 3470 mm 4270 mm
Vehicle Width 1410 mm 1580 mm
Vehicle Height 1490 mm 1400 mm
Wheelbase Size 2030 mm 2450 mm
Fuel Tank Capacity 26 L 43 L