1958 Austin A 35 vs. 1967 Isuzu Florian
To start off, 1967 Isuzu Florian is newer by 9 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 1,816 cc (4 cylinders), 1967 Isuzu Florian is equipped with a bigger engine. In terms of performance, 1967 Isuzu Florian (115 HP @ 5800 RPM) has 81 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1967 Isuzu Florian should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1967 Isuzu Florian weights approximately 275 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1967 Isuzu Florian (152 Nm @ 4200 RPM) has 84 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1967 Isuzu Florian will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 1967 Isuzu Florian | |
| Make | Austin | Isuzu |
| Model | A 35 | Florian |
| Year Released | 1958 | 1967 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 1816 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 115 HP |
| Engine RPM | 4750 RPM | 5800 RPM |
| Torque | 68 Nm | 152 Nm |
| Torque RPM | 2000 RPM | 4200 RPM |
| Engine Bore Size | 62.9 mm | 84 mm |
| Engine Stroke Size | 76.2 mm | 82 mm |
| Engine Compression Ratio | 8.3:1 | 9.7:1 |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 690 kg | 965 kg |
| Vehicle Length | 3470 mm | 4310 mm |
| Vehicle Width | 1410 mm | 1610 mm |
| Vehicle Height | 1490 mm | 1450 mm |
| Wheelbase Size | 2030 mm | 2510 mm |
| Fuel Tank Capacity | 26 L | 40 L |
