1958 Austin A 35 vs. 1974 Fiat 133
To start off, 1974 Fiat 133 is newer by 16 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 948 cc (4 cylinders), 1958 Austin A 35 is equipped with a bigger engine. In terms of performance, both vehicles can yield 34 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar.
Let's talk about torque, 1958 Austin A 35 (68 Nm @ 2000 RPM) has 14 more torque (in Nm) than 1974 Fiat 133. (54 Nm @ 3200 RPM). This means 1958 Austin A 35 will have an easier job in driving up hills or pulling heavy equipment than 1974 Fiat 133.
Compare all specifications:
| 1958 Austin A 35 | 1974 Fiat 133 | |
| Make | Austin | Fiat |
| Model | A 35 | 133 |
| Year Released | 1958 | 1974 |
| Engine Position | Front | Rear |
| Engine Size | 948 cc | 842 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 34 HP |
| Engine RPM | 4750 RPM | 4800 RPM |
| Torque | 68 Nm | 54 Nm |
| Torque RPM | 2000 RPM | 3200 RPM |
| Engine Bore Size | 62.9 mm | 65 mm |
| Engine Stroke Size | 76.2 mm | 68 mm |
| Engine Compression Ratio | 8.3:1 | 7.9:1 |
| Fuel Type | Gasoline | Gasoline |
| Vehicle Weight | 690 kg | 690 kg |
| Vehicle Length | 3470 mm | 3460 mm |
| Vehicle Width | 1410 mm | 1430 mm |
| Vehicle Height | 1490 mm | 1330 mm |
| Wheelbase Size | 2030 mm | 2030 mm |
