1958 Austin A 35 vs. 1976 BMW 3.3
To start off, 1976 BMW 3.3 is newer by 18 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 3,295 cc (6 cylinders), 1976 BMW 3.3 is equipped with a bigger engine. In terms of performance, 1976 BMW 3.3 (194 HP @ 5500 RPM) has 160 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1976 BMW 3.3 should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1976 BMW 3.3 weights approximately 804 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1976 BMW 3.3 (285 Nm @ 4300 RPM) has 217 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1976 BMW 3.3 will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 1976 BMW 3.3 | |
| Make | Austin | BMW |
| Model | A 35 | 3.3 |
| Year Released | 1958 | 1976 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 3295 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 194 HP |
| Engine RPM | 4750 RPM | 5500 RPM |
| Torque | 68 Nm | 285 Nm |
| Torque RPM | 2000 RPM | 4300 RPM |
| Engine Bore Size | 62.9 mm | 89 mm |
| Engine Stroke Size | 76.2 mm | 86 mm |
| Engine Compression Ratio | 8.3:1 | 9.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 690 kg | 1494 kg |
| Vehicle Length | 3470 mm | 4810 mm |
| Vehicle Width | 1410 mm | 1760 mm |
| Vehicle Height | 1490 mm | 1460 mm |
| Wheelbase Size | 2030 mm | 2800 mm |
| Fuel Tank Capacity | 26 L | 78 L |
