1958 Austin A 35 vs. 1977 Datsun 280Z
To start off, 1977 Datsun 280Z is newer by 19 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 2,753 cc (6 cylinders), 1977 Datsun 280Z is equipped with a bigger engine. In terms of performance, 1977 Datsun 280Z (150 HP @ 5600 RPM) has 116 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1977 Datsun 280Z should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1977 Datsun 280Z weights approximately 614 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1977 Datsun 280Z (221 Nm @ 4400 RPM) has 153 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1977 Datsun 280Z will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 1977 Datsun 280Z | |
| Make | Austin | Datsun |
| Model | A 35 | 280Z |
| Year Released | 1958 | 1977 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 2753 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 150 HP |
| Engine RPM | 4750 RPM | 5600 RPM |
| Torque | 68 Nm | 221 Nm |
| Torque RPM | 2000 RPM | 4400 RPM |
| Engine Bore Size | 62.9 mm | 86.1 mm |
| Engine Stroke Size | 76.2 mm | 79 mm |
| Engine Compression Ratio | 8.3:1 | 8.3:1 |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 690 kg | 1304 kg |
| Vehicle Length | 3470 mm | 4399 mm |
| Vehicle Width | 1410 mm | 1631 mm |
| Wheelbase Size | 2030 mm | 2304 mm |
| Fuel Tank Capacity | 26 L | 60 L |
