1958 Austin A 35 vs. 1978 Datsun 260Z
To start off, 1978 Datsun 260Z is newer by 20 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 2,565 cc (6 cylinders), 1978 Datsun 260Z is equipped with a bigger engine. In terms of performance, 1978 Datsun 260Z (163 HP @ 5600 RPM) has 129 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1978 Datsun 260Z should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1978 Datsun 260Z weights approximately 410 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1978 Datsun 260Z (213 Nm @ 4400 RPM) has 145 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1978 Datsun 260Z will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
1958 Austin A 35 | 1978 Datsun 260Z | |
Make | Austin | Datsun |
Model | A 35 | 260Z |
Year Released | 1958 | 1978 |
Engine Position | Front | Front |
Engine Size | 948 cc | 2565 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 34 HP | 163 HP |
Engine RPM | 4750 RPM | 5600 RPM |
Torque | 68 Nm | 213 Nm |
Torque RPM | 2000 RPM | 4400 RPM |
Engine Bore Size | 62.9 mm | 83 mm |
Engine Stroke Size | 76.2 mm | 79 mm |
Engine Compression Ratio | 8.3:1 | 8.3:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 690 kg | 1100 kg |
Vehicle Length | 3470 mm | 4135 mm |
Vehicle Width | 1410 mm | 1630 mm |
Vehicle Height | 1490 mm | 1290 mm |
Wheelbase Size | 2030 mm | 2310 mm |
Fuel Tank Capacity | 26 L | 60 L |