1958 Austin A 35 vs. 2013 Toyota Sienna
To start off, 2013 Toyota Sienna is newer by 55 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 3,500 cc (6 cylinders), 2013 Toyota Sienna is equipped with a bigger engine. In terms of performance, 2013 Toyota Sienna (262 HP @ 6200 RPM) has 228 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 2013 Toyota Sienna should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Sienna weights approximately 1425 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2013 Toyota Sienna (332 Nm @ 4700 RPM) has 264 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 2013 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
| 1958 Austin A 35 | 2013 Toyota Sienna | |
| Make | Austin | Toyota |
| Model | A 35 | Sienna |
| Year Released | 1958 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 3500 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 34 HP | 262 HP |
| Engine RPM | 4750 RPM | 6200 RPM |
| Torque | 68 Nm | 332 Nm |
| Torque RPM | 2000 RPM | 4700 RPM |
| Engine Bore Size | 62.9 mm | 94 mm |
| Engine Stroke Size | 76.2 mm | 83 mm |
| Fuel Type | Gasoline | Gasoline |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 690 kg | 2115 kg |
| Vehicle Length | 3470 mm | 5085 mm |
| Vehicle Width | 1410 mm | 1985 mm |
| Vehicle Height | 1490 mm | 1811 mm |
| Wheelbase Size | 2030 mm | 3030 mm |
| Fuel Tank Capacity | 26 L | 79 L |
