1958 Austin A 35 vs. 2013 Toyota Tacoma

To start off, 2013 Toyota Tacoma is newer by 55 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 2,700 cc (4 cylinders), 2013 Toyota Tacoma is equipped with a bigger engine. In terms of performance, 2013 Toyota Tacoma (157 HP @ 5200 RPM) has 123 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 2013 Toyota Tacoma should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Tacoma weights approximately 924 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 2013 Toyota Tacoma (244 Nm @ 3800 RPM) has 176 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 2013 Toyota Tacoma will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.

Compare all specifications:

1958 Austin A 35 2013 Toyota Tacoma
Make Austin Toyota
Model A 35 Tacoma
Year Released 1958 2013
Engine Position Front Front
Engine Size 948 cc 2700 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 34 HP 157 HP
Engine RPM 4750 RPM 5200 RPM
Torque 68 Nm 244 Nm
Torque RPM 2000 RPM 3800 RPM
Engine Bore Size 62.9 mm 95 mm
Engine Stroke Size 76.2 mm 95 mm
Engine Compression Ratio 8.3:1 10.5:1
Fuel Type Gasoline Gasoline
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 690 kg 1614 kg
Vehicle Length 3470 mm 5286 mm
Vehicle Width 1410 mm 1835 mm
Vehicle Height 1490 mm 1670 mm
Wheelbase Size 2030 mm 3246 mm
Fuel Tank Capacity 26 L 80 L