1958 Austin A 40 vs. 1992 Chrysler Le Baron
To start off, 1992 Chrysler Le Baron is newer by 34 year(s). Which means there will be less support and parts availability for 1958 Austin A 40. In addition, the cost of maintenance, including insurance, on 1958 Austin A 40 would be higher. At 2,501 cc (4 cylinders), 1992 Chrysler Le Baron is equipped with a bigger engine. In terms of performance, 1992 Chrysler Le Baron (152 HP @ 4800 RPM) has 117 more horse power than 1958 Austin A 40. (35 HP @ 4750 RPM) In normal driving conditions, 1992 Chrysler Le Baron should accelerate faster than 1958 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 1992 Chrysler Le Baron weights approximately 583 kg more than 1958 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 1992 Chrysler Le Baron, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Chrysler Le Baron (285 Nm @ 2800 RPM) has 217 more torque (in Nm) than 1958 Austin A 40. (68 Nm @ 2000 RPM). This means 1992 Chrysler Le Baron will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 40. 1992 Chrysler Le Baron has automatic transmission and 1958 Austin A 40 has manual transmission. 1958 Austin A 40 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Chrysler Le Baron will be easier to drive especially in heavy traffic.
Compare all specifications:
1958 Austin A 40 | 1992 Chrysler Le Baron | |
Make | Austin | Chrysler |
Model | A 40 | Le Baron |
Year Released | 1958 | 1992 |
Engine Position | Front | Front |
Engine Size | 948 cc | 2501 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 35 HP | 152 HP |
Engine RPM | 4750 RPM | 4800 RPM |
Torque | 68 Nm | 285 Nm |
Torque RPM | 2000 RPM | 2800 RPM |
Engine Bore Size | 62.9 mm | 87.5 mm |
Engine Stroke Size | 76.2 mm | 104 mm |
Engine Compression Ratio | 8.3:1 | 7.8:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 761 kg | 1344 kg |
Vehicle Length | 3670 mm | 4700 mm |
Vehicle Width | 1520 mm | 1760 mm |
Vehicle Height | 1450 mm | 1360 mm |
Wheelbase Size | 2130 mm | 2560 mm |