1958 Austin A 40 vs. 2004 Mahindra CL

To start off, 2004 Mahindra CL is newer by 46 year(s). Which means there will be less support and parts availability for 1958 Austin A 40. In addition, the cost of maintenance, including insurance, on 1958 Austin A 40 would be higher. At 2,522 cc (4 cylinders), 2004 Mahindra CL is equipped with a bigger engine. In terms of performance, 2004 Mahindra CL (62 HP @ 3200 RPM) has 27 more horse power than 1958 Austin A 40. (35 HP @ 4750 RPM) In normal driving conditions, 2004 Mahindra CL should accelerate faster than 1958 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 2004 Mahindra CL weights approximately 539 kg more than 1958 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2004 Mahindra CL is four wheel drive (4WD), it will have significant more traction and grip than 1958 Austin A 40. In wet, icy, snow, or gravel driving conditions, 2004 Mahindra CL will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Mahindra CL (165 Nm @ 1500 RPM) has 97 more torque (in Nm) than 1958 Austin A 40. (68 Nm @ 2000 RPM). This means 2004 Mahindra CL will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 40.

Compare all specifications:

1958 Austin A 40 2004 Mahindra CL
Make Austin Mahindra
Model A 40 CL
Year Released 1958 2004
Engine Position Front Front
Engine Size 948 cc 2522 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 35 HP 62 HP
Engine RPM 4750 RPM 3200 RPM
Torque 68 Nm 165 Nm
Torque RPM 2000 RPM 1500 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 761 kg 1300 kg
Vehicle Length 3670 mm 3360 mm
Vehicle Width 1520 mm 1460 mm
Vehicle Height 1450 mm 1790 mm
Wheelbase Size 2130 mm 2040 mm