1958 Austin A 40 vs. 2008 Chrysler Sebring
To start off, 2008 Chrysler Sebring is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Austin A 40. In addition, the cost of maintenance, including insurance, on 1958 Austin A 40 would be higher. At 2,360 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (173 HP @ 6000 RPM) has 138 more horse power than 1958 Austin A 40. (35 HP @ 4750 RPM) In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1958 Austin A 40. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 1054 kg more than 1958 Austin A 40. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Austin A 40 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Austin A 40. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (225 Nm @ 4400 RPM) has 157 more torque (in Nm) than 1958 Austin A 40. (68 Nm @ 2000 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 40. 2008 Chrysler Sebring has automatic transmission and 1958 Austin A 40 has manual transmission. 1958 Austin A 40 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1958 Austin A 40 | 2008 Chrysler Sebring | |
Make | Austin | Chrysler |
Model | A 40 | Sebring |
Year Released | 1958 | 2008 |
Engine Position | Front | Front |
Engine Size | 948 cc | 2360 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 35 HP | 173 HP |
Engine RPM | 4750 RPM | 6000 RPM |
Torque | 68 Nm | 225 Nm |
Torque RPM | 2000 RPM | 4400 RPM |
Engine Compression Ratio | 8.3:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 761 kg | 1815 kg |
Vehicle Length | 3670 mm | 4930 mm |
Vehicle Width | 1520 mm | 1820 mm |
Vehicle Height | 1450 mm | 1490 mm |
Wheelbase Size | 2130 mm | 2770 mm |
Fuel Tank Capacity | 26 L | 64 L |