1958 Austin A135 vs. 1950 Ferrari 195
To start off, 1958 Austin A135 is newer by 8 year(s). Which means there will be less support and parts availability for 1950 Ferrari 195. In addition, the cost of maintenance, including insurance, on 1950 Ferrari 195 would be higher. At 3,993 cc (6 cylinders), 1958 Austin A135 is equipped with a bigger engine. In terms of performance, 1958 Austin A135 (150 HP @ 4100 RPM) has 20 more horse power than 1950 Ferrari 195. (130 HP @ 6000 RPM). In normal driving conditions, 1958 Austin A135 should accelerate faster than 1950 Ferrari 195. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin A135 weights approximately 1130 kg more than 1950 Ferrari 195. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1958 Austin A135 | 1950 Ferrari 195 | |
| Make | Austin | Ferrari |
| Model | A135 | 195 |
| Year Released | 1958 | 1950 |
| Engine Position | Front | Front |
| Engine Size | 3993 cc | 2341 cc |
| Engine Cylinders | 6 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Horse Power | 150 HP | 130 HP |
| Engine RPM | 4100 RPM | 6000 RPM |
| Engine Bore Size | 87.3 mm | 65 mm |
| Engine Stroke Size | 111.1 mm | 58.8 mm |
| Engine Compression Ratio | 7.6:1 | 7.5:1 |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 2080 kg | 950 kg |
| Wheelbase Size | 3100 mm | 2510 mm |
| Fuel Tank Capacity | 34 L | 82 L |
