1958 Austin A135 vs. 1976 Fiat 128
To start off, 1976 Fiat 128 is newer by 18 year(s). Which means there will be less support and parts availability for 1958 Austin A135. In addition, the cost of maintenance, including insurance, on 1958 Austin A135 would be higher. At 3,993 cc (6 cylinders), 1958 Austin A135 is equipped with a bigger engine. In terms of performance, 1958 Austin A135 (150 HP @ 4100 RPM) has 97 more horse power than 1976 Fiat 128. (53 HP @ 6000 RPM). In normal driving conditions, 1958 Austin A135 should accelerate faster than 1976 Fiat 128. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin A135 weights approximately 1204 kg more than 1976 Fiat 128. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Austin A135 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Austin A135. However, in wet, icy, snow, or gravel driving conditions, 1976 Fiat 128, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1958 Austin A135 | 1976 Fiat 128 | |
| Make | Austin | Fiat |
| Model | A135 | 128 |
| Year Released | 1958 | 1976 |
| Engine Position | Front | Front |
| Engine Size | 3993 cc | 1116 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 150 HP | 53 HP |
| Engine RPM | 4100 RPM | 6000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 2080 kg | 876 kg |
| Vehicle Length | 5110 mm | 3880 mm |
| Vehicle Width | 1860 mm | 1600 mm |
