1958 Austin-Healey 100 vs. 1990 Fiat Tempra
To start off, 1990 Fiat Tempra is newer by 32 year(s). Which means there will be less support and parts availability for 1958 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1958 Austin-Healey 100 would be higher. At 2,639 cc (6 cylinders), 1958 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 1958 Austin-Healey 100 (101 HP @ 4600 RPM) has 29 more horse power than 1990 Fiat Tempra. (72 HP @ 6000 RPM). In normal driving conditions, 1958 Austin-Healey 100 should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin-Healey 100 weights approximately 94 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1958 Austin-Healey 100 (142 Nm @ 2400 RPM) has 33 more torque (in Nm) than 1990 Fiat Tempra. (109 Nm @ 2900 RPM). This means 1958 Austin-Healey 100 will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra.
Compare all specifications:
1958 Austin-Healey 100 | 1990 Fiat Tempra | |
Make | Austin-Healey | Fiat |
Model | 100 | Tempra |
Year Released | 1958 | 1990 |
Engine Position | Front | Front |
Engine Size | 2639 cc | 1372 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 101 HP | 72 HP |
Engine RPM | 4600 RPM | 6000 RPM |
Torque | 142 Nm | 109 Nm |
Torque RPM | 2400 RPM | 2900 RPM |
Engine Bore Size | 79.4 mm | 80.5 mm |
Engine Stroke Size | 88.9 mm | 67.4 mm |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1120 kg | 1026 kg |
Vehicle Length | 4010 mm | 4360 mm |
Vehicle Width | 1540 mm | 1690 mm |
Vehicle Height | 1250 mm | 1450 mm |
Wheelbase Size | 2340 mm | 2550 mm |