1958 Austin-Healey 100 vs. 2011 Fiat 500
To start off, 2011 Fiat 500 is newer by 53 year(s). Which means there will be less support and parts availability for 1958 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1958 Austin-Healey 100 would be higher. At 2,639 cc (6 cylinders), 1958 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 1958 Austin-Healey 100 (101 HP @ 4600 RPM) has 33 more horse power than 2011 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 1958 Austin-Healey 100 should accelerate faster than 2011 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin-Healey 100 weights approximately 180 kg more than 2011 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1958 Austin-Healey 100 (142 Nm @ 2400 RPM) has 40 more torque (in Nm) than 2011 Fiat 500. (102 Nm @ 3000 RPM). This means 1958 Austin-Healey 100 will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat 500.
Compare all specifications:
1958 Austin-Healey 100 | 2011 Fiat 500 | |
Make | Austin-Healey | Fiat |
Model | 100 | 500 |
Year Released | 1958 | 2011 |
Engine Position | Front | Front |
Engine Size | 2639 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 101 HP | 68 HP |
Engine RPM | 4600 RPM | 5500 RPM |
Torque | 142 Nm | 102 Nm |
Torque RPM | 2400 RPM | 3000 RPM |
Engine Bore Size | 79.4 mm | 70.8 mm |
Engine Stroke Size | 88.9 mm | 78.9 mm |
Fuel Type | Gasoline | Gasoline - Premium |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1120 kg | 940 kg |
Vehicle Length | 4010 mm | 3550 mm |
Vehicle Width | 1540 mm | 1630 mm |
Vehicle Height | 1250 mm | 1490 mm |
Wheelbase Size | 2340 mm | 2310 mm |
Fuel Tank Capacity | 54 L | 35 L |