1958 Austin-Healey 100 vs. 2012 Holden Captiva

To start off, 2012 Holden Captiva is newer by 54 year(s). Which means there will be less support and parts availability for 1958 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1958 Austin-Healey 100 would be higher. At 2,639 cc (6 cylinders), 1958 Austin-Healey 100 is equipped with a bigger engine. In terms of performance, 2012 Holden Captiva (148 HP @ 4000 RPM) has 47 more horse power than 1958 Austin-Healey 100. (101 HP @ 4600 RPM) In normal driving conditions, 2012 Holden Captiva should accelerate faster than 1958 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2012 Holden Captiva weights approximately 735 kg more than 1958 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 2012 Holden Captiva (320 Nm @ 2000 RPM) has 178 more torque (in Nm) than 1958 Austin-Healey 100. (142 Nm @ 2400 RPM). This means 2012 Holden Captiva will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin-Healey 100.

Compare all specifications:

1958 Austin-Healey 100 2012 Holden Captiva
Make Austin-Healey Holden
Model 100 Captiva
Year Released 1958 2012
Engine Position Front Front
Engine Size 2639 cc 1990 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 101 HP 148 HP
Engine RPM 4600 RPM 4000 RPM
Torque 142 Nm 320 Nm
Torque RPM 2400 RPM 2000 RPM
Engine Bore Size 79.4 mm 83 mm
Engine Stroke Size 88.9 mm 92 mm
Fuel Type Gasoline Diesel
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1120 kg 1855 kg
Vehicle Length 4010 mm 4580 mm
Vehicle Width 1540 mm 1860 mm
Vehicle Height 1250 mm 1710 mm
Wheelbase Size 2340 mm 2710 mm
Fuel Tank Capacity 54 L 65 L