1958 Austin-Healey Sprite vs. 2000 Peugeot 406
To start off, 2000 Peugeot 406 is newer by 42 year(s). Which means there will be less support and parts availability for 1958 Austin-Healey Sprite. In addition, the cost of maintenance, including insurance, on 1958 Austin-Healey Sprite would be higher. At 1,996 cc (4 cylinders), 2000 Peugeot 406 is equipped with a bigger engine. In terms of performance, 2000 Peugeot 406 (134 HP @ 5600 RPM) has 90 more horse power than 1958 Austin-Healey Sprite. (44 HP @ 5500 RPM) In normal driving conditions, 2000 Peugeot 406 should accelerate faster than 1958 Austin-Healey Sprite. With that said, vehicle weight also plays an important factor in acceleration. 2000 Peugeot 406 weights approximately 706 kg more than 1958 Austin-Healey Sprite. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Austin-Healey Sprite is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Austin-Healey Sprite. However, in wet, icy, snow, or gravel driving conditions, 2000 Peugeot 406, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Peugeot 406 (190 Nm @ 4100 RPM) has 119 more torque (in Nm) than 1958 Austin-Healey Sprite. (71 Nm @ 3000 RPM). This means 2000 Peugeot 406 will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin-Healey Sprite. 2000 Peugeot 406 has automatic transmission and 1958 Austin-Healey Sprite has manual transmission. 1958 Austin-Healey Sprite will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Peugeot 406 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1958 Austin-Healey Sprite | 2000 Peugeot 406 | |
| Make | Austin-Healey | Peugeot |
| Model | Sprite | 406 |
| Year Released | 1958 | 2000 |
| Body Type | Roadster | Coupe |
| Engine Position | Front | Front |
| Engine Size | 948 cc | 1996 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 44 HP | 134 HP |
| Engine RPM | 5500 RPM | 5600 RPM |
| Torque | 71 Nm | 190 Nm |
| Torque RPM | 3000 RPM | 4100 RPM |
| Engine Compression Ratio | 8.3:1 | 10.8:1 |
| Top Speed | 124 km/hour | 205 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 664 kg | 1370 kg |
| Vehicle Length | 3500 mm | 4620 mm |
| Vehicle Width | 1350 mm | 1790 mm |
| Vehicle Height | 1270 mm | 1360 mm |
| Wheelbase Size | 2040 mm | 2730 mm |
| Fuel Tank Capacity | 27 L | 70 L |
