1958 Austin Princess vs. 1956 Lancia Aurelia

To start off, 1958 Austin Princess is newer by 2 year(s). Which means there will be less support and parts availability for 1956 Lancia Aurelia. In addition, the cost of maintenance, including insurance, on 1956 Lancia Aurelia would be higher. At 3,993 cc (6 cylinders), 1958 Austin Princess is equipped with a bigger engine. In terms of performance, both vehicles can yield 119 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1958 Austin Princess weights approximately 1050 kg more than 1956 Lancia Aurelia.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Austin Princess (251 Nm @ 2000 RPM) has 65 more torque (in Nm) than 1956 Lancia Aurelia. (186 Nm @ 3500 RPM). This means 1958 Austin Princess will have an easier job in driving up hills or pulling heavy equipment than 1956 Lancia Aurelia.

Compare all specifications:

1958 Austin Princess 1956 Lancia Aurelia
Make Austin Lancia
Model Princess Aurelia
Year Released 1958 1956
Engine Position Front Front
Engine Size 3993 cc 2457 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 119 HP 119 HP
Engine RPM 4000 RPM 5100 RPM
Torque 251 Nm 186 Nm
Torque RPM 2000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 2180 kg 1130 kg
Vehicle Length 5470 mm 4380 mm
Vehicle Width 1900 mm 1560 mm
Vehicle Height 1780 mm 1370 mm
Wheelbase Size 3360 mm 2660 mm