1958 BMW 502 vs. 2010 Fiat 500
To start off, 2010 Fiat 500 is newer by 52 year(s). Which means there will be less support and parts availability for 1958 BMW 502. In addition, the cost of maintenance, including insurance, on 1958 BMW 502 would be higher. At 2,580 cc (8 cylinders), 1958 BMW 502 is equipped with a bigger engine. In terms of performance, both vehicles can yield 101 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1958 BMW 502 weights approximately 405 kg more than 2010 Fiat 500.
Because 1958 BMW 502 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 BMW 502. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1958 BMW 502 | 2010 Fiat 500 | |
Make | BMW | Fiat |
Model | 502 | 500 |
Year Released | 1958 | 2010 |
Engine Position | Front | Front |
Engine Size | 2580 cc | 1368 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 101 HP | 101 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1410 kg | 1005 kg |
Vehicle Length | 4740 mm | 3550 mm |
Vehicle Width | 1780 mm | 1630 mm |
Vehicle Height | 1540 mm | 1490 mm |
Wheelbase Size | 2840 mm | 2310 mm |
Fuel Tank Capacity | 70 L | 35 L |