1958 BMW 600 vs. 1958 Rover P4

To start off, both 1958 BMW 600 and 1958 Rover P4 were released in the same year (1958). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,230 cc (6 cylinders), 1958 Rover P4 is equipped with a bigger engine. In terms of performance, 1958 Rover P4 (70 HP @ 4500 RPM) has 50 more horse power than 1958 BMW 600. (20 HP @ 4500 RPM) In normal driving conditions, 1958 Rover P4 should accelerate faster than 1958 BMW 600. With that said, vehicle weight also plays an important factor in acceleration. 1958 Rover P4 weights approximately 850 kg more than 1958 BMW 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Rover P4 (153 Nm @ 1750 RPM) has 115 more torque (in Nm) than 1958 BMW 600. (38 Nm @ 2800 RPM). This means 1958 Rover P4 will have an easier job in driving up hills or pulling heavy equipment than 1958 BMW 600.

Compare all specifications:

1958 BMW 600 1958 Rover P4
Make BMW Rover
Model 600 P4
Year Released 1958 1958
Engine Position Rear Front
Engine Size 583 cc 2230 cc
Engine Cylinders 2 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 20 HP 70 HP
Engine RPM 4500 RPM 4500 RPM
Torque 38 Nm 153 Nm
Torque RPM 2800 RPM 1750 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 550 kg 1400 kg
Vehicle Length 2910 mm 4540 mm
Vehicle Width 1410 mm 1680 mm
Vehicle Height 1380 mm 1620 mm
Wheelbase Size 1710 mm 2830 mm