1958 BMW 600 vs. 1994 Mazda RX-7

To start off, 1994 Mazda RX-7 is newer by 36 year(s). Which means there will be less support and parts availability for 1958 BMW 600. In addition, the cost of maintenance, including insurance, on 1958 BMW 600 would be higher. At 2,616 cc, 1994 Mazda RX-7 is equipped with a bigger engine. In terms of performance, 1994 Mazda RX-7 (238 HP @ 6500 RPM) has 218 more horse power than 1958 BMW 600. (20 HP @ 4500 RPM) In normal driving conditions, 1994 Mazda RX-7 should accelerate faster than 1958 BMW 600. With that said, vehicle weight also plays an important factor in acceleration. 1994 Mazda RX-7 weights approximately 764 kg more than 1958 BMW 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1994 Mazda RX-7 (296 Nm @ 5000 RPM) has 258 more torque (in Nm) than 1958 BMW 600. (38 Nm @ 2800 RPM). This means 1994 Mazda RX-7 will have an easier job in driving up hills or pulling heavy equipment than 1958 BMW 600.

Compare all specifications:

1958 BMW 600 1994 Mazda RX-7
Make BMW Mazda
Model 600 RX-7
Year Released 1958 1994
Body Type Coupe Coupe
Engine Position Rear Front
Engine Size 583 cc 2616 cc
Engine Type in-line dual-disk rotary
Horse Power 20 HP 238 HP
Engine RPM 4500 RPM 6500 RPM
Torque 38 Nm 296 Nm
Torque RPM 2800 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 550 kg 1314 kg
Vehicle Length 2910 mm 4300 mm
Vehicle Width 1410 mm 1760 mm
Vehicle Height 1380 mm 1240 mm
Wheelbase Size 1710 mm 2430 mm