1958 Bristol 406 vs. 2000 Cadillac Seville
To start off, 2000 Cadillac Seville is newer by 42 year(s). Which means there will be less support and parts availability for 1958 Bristol 406. In addition, the cost of maintenance, including insurance, on 1958 Bristol 406 would be higher. At 4,572 cc (8 cylinders), 2000 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2000 Cadillac Seville (301 HP @ 6000 RPM) has 210 more horse power than 1958 Bristol 406. (91 HP @ 4700 RPM) In normal driving conditions, 2000 Cadillac Seville should accelerate faster than 1958 Bristol 406. With that said, vehicle weight also plays an important factor in acceleration. 2000 Cadillac Seville weights approximately 544 kg more than 1958 Bristol 406. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Bristol 406 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Bristol 406. However, in wet, icy, snow, or gravel driving conditions, 2000 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Cadillac Seville (400 Nm @ 4500 RPM) has 226 more torque (in Nm) than 1958 Bristol 406. (174 Nm @ 3000 RPM). This means 2000 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 1958 Bristol 406. 2000 Cadillac Seville has automatic transmission and 1958 Bristol 406 has manual transmission. 1958 Bristol 406 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1958 Bristol 406 | 2000 Cadillac Seville | |
Make | Bristol | Cadillac |
Model | 406 | Seville |
Year Released | 1958 | 2000 |
Engine Position | Front | Front |
Engine Size | 2216 cc | 4572 cc |
Engine Cylinders | 6 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 91 HP | 301 HP |
Engine RPM | 4700 RPM | 6000 RPM |
Torque | 174 Nm | 400 Nm |
Torque RPM | 3000 RPM | 4500 RPM |
Engine Bore Size | 68.7 mm | 93 mm |
Engine Stroke Size | 99.6 mm | 84 mm |
Engine Compression Ratio | 8.5:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1260 kg | 1804 kg |
Vehicle Length | 4990 mm | 5110 mm |
Vehicle Width | 1730 mm | 1910 mm |
Vehicle Height | 1530 mm | 1420 mm |
Wheelbase Size | 2900 mm | 2890 mm |
Fuel Tank Capacity | 81 L | 70 L |