1958 Ferrari 250 GT vs. 1998 Ford Contour
To start off, 1998 Ford Contour is newer by 40 year(s). Which means there will be less support and parts availability for 1958 Ferrari 250 GT. In addition, the cost of maintenance, including insurance, on 1958 Ferrari 250 GT would be higher. At 2,953 cc (12 cylinders), 1958 Ferrari 250 GT is equipped with a bigger engine. In terms of performance, 1958 Ferrari 250 GT (260 HP @ 7000 RPM) has 132 more horse power than 1998 Ford Contour. (128 HP @ 5500 RPM). In normal driving conditions, 1958 Ferrari 250 GT should accelerate faster than 1998 Ford Contour. With that said, vehicle weight also plays an important factor in acceleration. 1958 Ferrari 250 GT weights approximately 73 kg more than 1998 Ford Contour. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Ferrari 250 GT is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Ferrari 250 GT. However, in wet, icy, snow, or gravel driving conditions, 1998 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Ferrari 250 GT (314 Nm @ 5000 RPM) has 134 more torque (in Nm) than 1998 Ford Contour. (180 Nm @ 4000 RPM). This means 1958 Ferrari 250 GT will have an easier job in driving up hills or pulling heavy equipment than 1998 Ford Contour. 1998 Ford Contour has automatic transmission and 1958 Ferrari 250 GT has manual transmission. 1958 Ferrari 250 GT will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Ford Contour will be easier to drive especially in heavy traffic.
Compare all specifications:
1958 Ferrari 250 GT | 1998 Ford Contour | |
Make | Ferrari | Ford |
Model | 250 GT | Contour |
Year Released | 1958 | 1998 |
Engine Position | Front | Front |
Engine Size | 2953 cc | 1989 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 260 HP | 128 HP |
Engine RPM | 7000 RPM | 5500 RPM |
Torque | 314 Nm | 180 Nm |
Torque RPM | 5000 RPM | 4000 RPM |
Engine Bore Size | 73 mm | 84.9 mm |
Engine Stroke Size | 58.8 mm | 88 mm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1315 kg | 1242 kg |
Vehicle Length | 4400 mm | 4680 mm |
Vehicle Width | 1660 mm | 1760 mm |
Vehicle Height | 1400 mm | 1380 mm |
Wheelbase Size | 2610 mm | 2710 mm |