1958 Holden FE vs. 1996 Oldsmobile Cutlass
To start off, 1996 Oldsmobile Cutlass is newer by 38 year(s). Which means there will be less support and parts availability for 1958 Holden FE. In addition, the cost of maintenance, including insurance, on 1958 Holden FE would be higher. At 3,135 cc (6 cylinders), 1996 Oldsmobile Cutlass is equipped with a bigger engine. In terms of performance, 1996 Oldsmobile Cutlass (150 HP @ 4800 RPM) has 90 more horse power than 1958 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1996 Oldsmobile Cutlass should accelerate faster than 1958 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1996 Oldsmobile Cutlass weights approximately 424 kg more than 1958 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Holden FE is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Holden FE. However, in wet, icy, snow, or gravel driving conditions, 1996 Oldsmobile Cutlass, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Oldsmobile Cutlass (249 Nm @ 3200 RPM) has 99 more torque (in Nm) than 1958 Holden FE. (150 Nm @ 1200 RPM). This means 1996 Oldsmobile Cutlass will have an easier job in driving up hills or pulling heavy equipment than 1958 Holden FE. 1996 Oldsmobile Cutlass has automatic transmission and 1958 Holden FE has manual transmission. 1958 Holden FE will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Oldsmobile Cutlass will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1958 Holden FE | 1996 Oldsmobile Cutlass | |
| Make | Holden | Oldsmobile |
| Model | FE | Cutlass |
| Year Released | 1958 | 1996 |
| Engine Position | Front | Front |
| Engine Size | 2166 cc | 3135 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 60 HP | 150 HP |
| Engine RPM | 4000 RPM | 4800 RPM |
| Torque | 150 Nm | 249 Nm |
| Torque RPM | 1200 RPM | 3200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 980 kg | 1404 kg |
| Vehicle Length | 4480 mm | 4850 mm |
| Vehicle Width | 1710 mm | 1770 mm |
| Vehicle Height | 1560 mm | 1440 mm |
| Wheelbase Size | 2670 mm | 2720 mm |
