1958 Holden FE vs. 1999 Audi S3

To start off, 1999 Audi S3 is newer by 41 year(s). Which means there will be less support and parts availability for 1958 Holden FE. In addition, the cost of maintenance, including insurance, on 1958 Holden FE would be higher. At 2,166 cc (6 cylinders), 1958 Holden FE is equipped with a bigger engine. In terms of performance, 1999 Audi S3 (210 HP @ 5800 RPM) has 150 more horse power than 1958 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1999 Audi S3 should accelerate faster than 1958 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1999 Audi S3 weights approximately 550 kg more than 1958 Holden FE. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1999 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 1958 Holden FE. In wet, icy, snow, or gravel driving conditions, 1999 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Audi S3 (270 Nm @ 2100 RPM) has 120 more torque (in Nm) than 1958 Holden FE. (150 Nm @ 1200 RPM). This means 1999 Audi S3 will have an easier job in driving up hills or pulling heavy equipment than 1958 Holden FE.

Compare all specifications:

1958 Holden FE 1999 Audi S3
Make Holden Audi
Model FE S3
Year Released 1958 1999
Engine Position Front Front
Engine Size 2166 cc 1781 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 60 HP 210 HP
Engine RPM 4000 RPM 5800 RPM
Torque 150 Nm 270 Nm
Torque RPM 1200 RPM 2100 RPM
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 980 kg 1530 kg
Vehicle Length 4480 mm 4160 mm
Vehicle Width 1710 mm 1760 mm
Vehicle Height 1560 mm 1430 mm
Wheelbase Size 2670 mm 2520 mm