1958 Jeep CJ vs. 1966 Tatra T603

To start off, 1966 Tatra T603 is newer by 8 year(s). Which means there will be less support and parts availability for 1958 Jeep CJ. In addition, the cost of maintenance, including insurance, on 1958 Jeep CJ would be higher. At 3,687 cc (6 cylinders), 1958 Jeep CJ is equipped with a bigger engine. In terms of performance, 1958 Jeep CJ (135 HP @ 4200 RPM) has 31 more horse power than 1966 Tatra T603. (104 HP @ 4500 RPM). In normal driving conditions, 1958 Jeep CJ should accelerate faster than 1966 Tatra T603. With that said, vehicle weight also plays an important factor in acceleration. 1966 Tatra T603 weights approximately 290 kg more than 1958 Jeep CJ.

Because 1958 Jeep CJ is four wheel drive (4WD), it will have significant more traction and grip than 1966 Tatra T603. In wet, icy, snow, or gravel driving conditions, 1958 Jeep CJ will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Jeep CJ (326 Nm @ 2400 RPM) has 156 more torque (in Nm) than 1966 Tatra T603. (170 Nm @ 3500 RPM). This means 1958 Jeep CJ will have an easier job in driving up hills or pulling heavy equipment than 1966 Tatra T603.

Compare all specifications:

1958 Jeep CJ 1966 Tatra T603
Make Jeep Tatra
Model CJ T603
Year Released 1958 1966
Body Type SUV Sedan
Engine Position Front Rear
Engine Size 3687 cc 2472 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V V
Horse Power 135 HP 104 HP
Engine RPM 4200 RPM 4500 RPM
Torque 326 Nm 170 Nm
Torque RPM 2400 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1180 kg 1470 kg
Vehicle Length 3520 mm 5070 mm
Vehicle Width 1550 mm 1920 mm
Vehicle Height 1740 mm 1540 mm
Wheelbase Size 2060 mm 2760 mm