1958 Talbot 2500 vs. 2010 Chrysler PT Cruiser
To start off, 2010 Chrysler PT Cruiser is newer by 52 year(s). Which means there will be less support and parts availability for 1958 Talbot 2500. In addition, the cost of maintenance, including insurance, on 1958 Talbot 2500 would be higher. At 2,491 cc (4 cylinders), 1958 Talbot 2500 is equipped with a bigger engine. In terms of performance, 2010 Chrysler PT Cruiser (139 HP @ 5700 RPM) has 20 more horse power than 1958 Talbot 2500. (119 HP @ 5000 RPM) In normal driving conditions, 2010 Chrysler PT Cruiser should accelerate faster than 1958 Talbot 2500. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler PT Cruiser weights approximately 425 kg more than 1958 Talbot 2500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1958 Talbot 2500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Talbot 2500. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1958 Talbot 2500 (196 Nm @ 2200 RPM) has 7 more torque (in Nm) than 2010 Chrysler PT Cruiser. (189 Nm @ 4150 RPM). This means 1958 Talbot 2500 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler PT Cruiser. 2010 Chrysler PT Cruiser has automatic transmission and 1958 Talbot 2500 has manual transmission. 1958 Talbot 2500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler PT Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1958 Talbot 2500 | 2010 Chrysler PT Cruiser | |
| Make | Talbot | Chrysler |
| Model | 2500 | PT Cruiser |
| Year Released | 1958 | 2010 |
| Engine Size | 2491 cc | 1996 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 119 HP | 139 HP |
| Engine RPM | 5000 RPM | 5700 RPM |
| Torque | 196 Nm | 189 Nm |
| Torque RPM | 2200 RPM | 4150 RPM |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1000 kg | 1425 kg |
| Vehicle Length | 4210 mm | 4290 mm |
| Vehicle Width | 1650 mm | 1710 mm |
| Vehicle Height | 1340 mm | 1610 mm |
| Wheelbase Size | 2510 mm | 2620 mm |
