1958 Talbot 2500 vs. 2013 Ford Flex

To start off, 2013 Ford Flex is newer by 55 year(s). Which means there will be less support and parts availability for 1958 Talbot 2500. In addition, the cost of maintenance, including insurance, on 1958 Talbot 2500 would be higher. At 3,500 cc (6 cylinders), 2013 Ford Flex is equipped with a bigger engine. In terms of performance, 2013 Ford Flex (281 HP @ 6500 RPM) has 162 more horse power than 1958 Talbot 2500. (119 HP @ 5000 RPM) In normal driving conditions, 2013 Ford Flex should accelerate faster than 1958 Talbot 2500. With that said, vehicle weight also plays an important factor in acceleration. 2013 Ford Flex weights approximately 1028 kg more than 1958 Talbot 2500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1958 Talbot 2500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Talbot 2500. However, in wet, icy, snow, or gravel driving conditions, 2013 Ford Flex, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Ford Flex (346 Nm @ 4000 RPM) has 150 more torque (in Nm) than 1958 Talbot 2500. (196 Nm @ 2200 RPM). This means 2013 Ford Flex will have an easier job in driving up hills or pulling heavy equipment than 1958 Talbot 2500. 2013 Ford Flex has automatic transmission and 1958 Talbot 2500 has manual transmission. 1958 Talbot 2500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Ford Flex will be easier to drive especially in heavy traffic.

Compare all specifications: