1959 Abarth 1000 vs. 2010 Nissan NP300

To start off, 2010 Nissan NP300 is newer by 51 year(s). Which means there will be less support and parts availability for 1959 Abarth 1000. In addition, the cost of maintenance, including insurance, on 1959 Abarth 1000 would be higher. At 2,486 cc (4 cylinders), 2010 Nissan NP300 is equipped with a bigger engine. In terms of performance, 2010 Nissan NP300 (131 HP @ 3500 RPM) has 43 more horse power than 1959 Abarth 1000. (88 HP @ 8000 RPM) In normal driving conditions, 2010 Nissan NP300 should accelerate faster than 1959 Abarth 1000.

Because 2010 Nissan NP300 is four wheel drive (4WD), it will have significant more traction and grip than 1959 Abarth 1000. In wet, icy, snow, or gravel driving conditions, 2010 Nissan NP300 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan NP300 (304 Nm @ 2000 RPM) has 207 more torque (in Nm) than 1959 Abarth 1000. (97 Nm @ 5000 RPM). This means 2010 Nissan NP300 will have an easier job in driving up hills or pulling heavy equipment than 1959 Abarth 1000.

Compare all specifications:

1959 Abarth 1000 2010 Nissan NP300
Make Abarth Nissan
Model 1000 NP300
Year Released 1959 2010
Engine Position Rear Front
Engine Size 998 cc 2486 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 88 HP 131 HP
Engine RPM 8000 RPM 3500 RPM
Torque 97 Nm 304 Nm
Torque RPM 5000 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Length 3700 mm 5180 mm
Vehicle Width 1560 mm 1700 mm
Vehicle Height 1210 mm 1630 mm
Wheelbase Size 2170 mm 2960 mm
Fuel Tank Capacity 60 L 75 L